1. Definition of breather valveThe breather valve is an important accessory to keep the storage tank in safe. It is installed on the top of the tank and is used to automatically control the opening and closing of the internal and external gas channels of the storage tank, maintain the balance of pre
20
2022-10
1. Product introductionThe emergency shutoff valve, also known as the sub-sea valve, installed at the bottom of the tank body of a tanker, is a vital safety unit in gas applications. The valve is sealed inside the tank. The valve body is equipped with a shutoff groove. When it is strongly collided,
05
2022-09
(continued from the preceding part)Introduction of manhole cover of fuel tanker (Part 2)- Technical requirements, test methods and inspection rules1. Technical requirements1.1.1 The manhole cover should meet the requirements of QC/T1065-2017 standard.1.1.2 The raw materials, purchased parts, outsour
18
2022-08
Introduction of manhole cover of fuel tanker (Part 1)- composition, quality standard, definition, installation, operation and maintenance1. Product introductionThe manhole cover is installed on the top of the tank of the fuel tanker with the functions of internal breathing and emergency exhaust. The
11
2022-08
ProblemsCause analysisTroubleshootingUnable to absorb oil; or Insufficient oil absorption1. The engine speed is too low.2. There is no lead oil in the oil pump.3. The oil suction pipe leaks, and the vacuum degree of the oil pipe is low.4. The oil suction pipe is blocked.5. The three-way ball valve i
05
2022-08
Introduction of fuel tankers(Part 2)- use and maintenance1. Preparation before the new vehicles using(1) Clean the tank with gasoline (pay attention to the ventilation in the tank during operation) or compressed air before use.(2) Open the drain outlet or valve to clean the tank.(3) Check whether th
content is empty!