Views: 16 Author: Site Editor Publish Time: 2023-06-06 Origin: Site
The aluminum alloy rim is a part of the wheel that fixes the tire, it is the rotating part that connects the wheel hub and axle, and it is responsible for absorbing the load between the tire and axle. The inner ring is a part of the hub, it refers to the part that comes into contact with the tire, and is often referred to as the wheel.
What is the definition of steel wheel rim?
What are the advantages of steel wheel rims?
What are the structural characteristics of aluminum alloy rim?
For example, aluminum alloy rims and hubs are called aluminum alloy rims and hubs. Under the conditions of modern industrial technology, after continuous improvement, the wheel hub has become a fully functional integral component. The hub has the functions to carry the vehicle weight, transfer power and dissipate heat from the tire. As a rotating moving part, under the premise of a certain stiffness, the hub must meet the conditions of light weight, fatigue strength and dynamic balance.
The biggest advantage of aluminum alloy rim is that the manufacturing process is simple and generally applies the casting process. For example, the aluminum steel wheel rim generally adopts the low-pressure casting process, the production cost is relatively low, and the ability to withstand metal fatigue is very strong;
An aluminum steel wheel rim rim with the same weight is the same wheel material, the material is much heavier than the aluminum alloy material, the inertial resistance is large, the heat dissipation is also poor, and it rust easily.
The aluminum steel wheel rim rim is made of alloy material, the wheel hub has light weight, low inertia resistance, high production precision, low deformation during high speed rotation and low inertia resistance, which is conducive to improving the straight line driving behavior of the vehicle, Reduction of tyre rolling resistance and thus reduction of fuel consumption.
This type of aluminum alloy rim is single piece and has a deep groove in the middle of its section. Mainly used for cars and light off-road vehicles. It has a flange with one shoulder to place the bead of the outer tire. Its shoulder is usually slightly inclined towards the middle and its angle of inclination is generally 4–6 degrees. The maximum diameter of the inclined part is called the contact between the tire bead and rim. combined diameter. A deep groove is installed in the middle of the section to facilitate disassembly and assembly of the tire. The deep groove wheel has a simple structure, high rigidity and low mass and is best suited for tires with small size and high elasticity. However, it is difficult to fit larger and stiffer tires into such a total aluminum steel wheel rim rim.
WONDEE AUTOPARTS was founded 1999 as a professional automotive supplier and specializes in providing semi-trailers and semi-trailer components, trailer components, truck components, agricultural trailers and their components.
