 |
Description
| Features(Type 1): | |
| Product Name: | Vapour recovery valve |
| Application: | Installed on oil and gas recovery system through hose. When the tanker is filling and discharging oil, the valve controls the output and input of gas in the tank. It can control the opening of the next valve through series connection. |
| Standard: | GB18564.1-2006 |
| Material: | Cast aluminum alloy,stainless steel |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| WD04-80M1 | Threaded connection，M105×2 |
| Technique Specification: | |
| Nominal diameter: | DN80（3″） |
| Nominal pressure: | 0.4MPa |
| Opening mode: | Pneumatic |
| Installation mode: | Threaded |
| Operating temperature range: | -20℃ ~ 50℃ |
| Operating temperature range under special working conditions: | -40℃ ~ 70℃ |
| Remarks: | The seal need to be replaced every 6 months, and customized in special conditions. |
| Features(Type 2): | |
| Product Name: | Vapour recovery valve |
| Application: | Installed on oil and gas recovery system through hose. When the tanker is filling and discharging oil, the valve controls the output and input of gas in the tank. It can control the opening of the next valve through series connection. |
| Standard: | GB18564.1-2006 |
| Material: | Cast aluminum alloy |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| WD04-80M1 | Threaded connection，M95×2 |
| Technique Specification: | |
| Nominal diameter: | DN80（3″） |
| Nominal pressure: | 0.4MPa |
| Opening mode: | Pneumatic |
| Installation mode: | Threaded |
| Operating temperature range: | -20℃ ~ 50℃ |
| Operating temperature range under special working conditions: | -40℃ ~ 70℃ |
| Remarks: | The seal need to be replaced every 6 months, and customized in special conditions. |
| Features(Type 3): | |
| Product Name: | Vapour recovery valve |
| Application: | Installed on oil and gas recovery system through hose. When the tanker is filling and discharging oil, the valve controls the output and input of gas in the tank. It can control the opening of the next valve through series connection. |
| Standard: | GB18564.1-2006 |
| Material: | Cast aluminum alloy |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| WD04-80B | Flange connection |
| WD04-80PB | Flange connection |
| Technique Specification: | |
| Nominal diameter: | DN80（3″） |
| Nominal pressure: | 0.4MPa |
| Opening mode: | Pneumatic |
| Size of mounting hole: | 8-∅11 |
| Operating temperature range: | Aluminum alloy: - 20 ℃~70 ℃ |
| Stainless steel: - 40 ℃~200 ℃ | |
| Remarks: | The seal need to be replaced every 6 months, and customized in special conditions. |
| Features(Type 4): | |
| Product Name: | Vapour recovery valve |
| Application: | Installed on oil and gas recovery system through hose. When the tanker is filling and discharging oil, the valve controls the output and input of gas in the tank. It can control the opening of the next valve through series connection. |
| Standard: | GB18564.1-2006 |
| Material: | Cast aluminum alloy |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| WD04-80 | Flange connection |
| Technique Specification: | |
| Nominal diameter: | DN80（3″） |
| Nominal pressure: | 0.5MPa |
| Opening mode: | Pneumatic |
| Installation mode: | Flange type |
| Operating temperature range: | -20℃ ~ 50℃ |
| Remarks: | The seal need to be replaced every 6 months, and customized in special conditions. |
