 |
Description
| Feature(Type 1) | |
| Product Name: | Vapour recovery adaptor valve |
| Application | Installed at the bottom of the tanker close to the oil discharging valve. The valve body is equipped with a pneumatic interlocking valve, which can be triggered through the valve docking |
| Standard: | GB18564.1-2006 |
| Material: | Cast aluminum alloy |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| WD07F-100 | Flange connection |
| Technique Specification: | |
| Nominal diameter: | DN100（4″） |
| Nominal pressure: | 0.4MPa |
| Opening mode: | Pneumatic |
| Installation mode: | Flange type |
| Operating temperature range: | -20℃ ~ 50℃ |
| Operating temperature range under special working conditions: | -40℃ ~ 70℃ |
| Remark: | The seal material shall be replaced every 6 months, and it shall be customized under special working conditions. |
| Feature(Type 2) | |
| Product Name: | Vapour recovery adaptor valve. |
| Application | Installed at the bottom of the tanker close to the oil discharging valve. The valve body is equipped with a pneumatic interlocking valve, which can be triggered through the valve docking |
| Standard: | GB18564.1-2006 |
| Material: | Stainless steel |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| WD07F-100P | Flange connection |
| Technique Specification: | |
| Nominal diameter: | DN100（4″） |
| Nominal pressure: | 0.4MPa |
| Opening mode: | Pneumatic |
| Size of mounting hole: | 8-∅11 |
| Operating temperature range: | -40℃ ~ 200℃ |
| Operating temperature range under special working conditions: | -40℃ ~ 250℃ |
| Remark: | The seal material shall be replaced every 6 months, and it shall be customized under special working conditions. |
| Feature(Type 3) | |
| Product Name: | Vapour recovery adaptor valve. |
| Application | Installed at the bottom of the tanker close to the oil discharging valve. The valve body is equipped with a pneumatic interlocking valve, which can be triggered through the valve docking |
| Standard: | GB18564.1-2006 |
| Material: | Cast aluminum alloy |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| WD07M-100 | Threaded connection, Rc4″ |
| WD07N-100 | Threaded connection, NPT4″ |
| Technique Specification: | |
| Nominal diameter: | DN100（4″） |
| Nominal pressure: | 0.4MPa |
| Opening mode: | Pneumatic |
| Installation mode: | Female thread type |
| Operating temperature range: | -20℃ ~ 50℃ |
| Operating temperature range under special working conditions: | -40℃ ~ 70℃ |
| Remark: | The seal material shall be replaced every 6 months, and it shall be customized under special working conditions. |
