 |
Description
| Features(Type 1): | |
| Name: | Oil discharge valve |
| Application: | Installed at the bottom of the side of the tanker, and adopts a quick connection structure. The interface size meets the API RP1004 standard and can be connected with the standard API connector. |
| Standard: | GB18564.1-2006, |
| Material: | Cast aluminum alloy |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| WD05-100 | With two gears, no eyepiece |
| WD05-100A | With two gears, no eyepiece |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| Nominal diameter: | DN100（4″） |
| Nominal pressure: | 0.5MPa |
| Opening mode: | Manual |
| Installation method: | Flange type |
| Applicable medium : | Diesel, gasoline |
| Working temperature range： | -20℃ ~ 50℃ |
| Working temperature range under special working conditions： | -40℃ ~ 70℃ |
| Remarks: | The seal need to be replaced every 6 months, and customized in special conditions. |
| Features(Type 2): | |
| Name: | Oil discharge valve |
| Application: | Installed at the bottom of the side of the tanker, and adopts a quick connection structure. The interface size meets the API RP1004 standard and can be connected with the standard API connector. |
| Standard: | GB18564.1-2006, |
| Material: | Stainless steel |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| WD05-100P | With two gears, no eyepiece |
| Parameters(Selecting Order Item): | |
| Item No. | Description |
| Nominal diameter: | DN100（4″） |
| Nominal pressure: | 1.6MPa |
| Opening mode: | Manual |
| Installation method: | Flange type |
| Applicable medium : | Dangerous chemicals |
| Working temperature range： | -40℃ ~ 200℃ |
| Working temperature range under special working conditions： | -60℃ ~ 250℃ |
| Remarks: | The seal need to be replaced every 6 months, and customized in special conditions. |
