​Brake Chamber Installation And Maintenance Guide

Brake chamber installation and maintenance guide

Installation procedure

1. Fixed bracket installation: First install the fixed bracket of the brake chamber to ensure that it is firm, reliable and accurate.

2. Connect the pipe: according to the installation drawings, connect the brake chamber with other components of the brake system (such as gas storage tank, brake valve, etc.) through the pipe. Pay attention to the connection of the pipe should be tight without leakage, and install the support to fix the pipe.

3. Install the brake chamber body: Place the brake chamber body on the fixed bracket, and fix it firmly with bolts and other fasteners. During installation, pay attention to keep the brake chamber level and avoid tilting.

4. Electrical connection: For the brake chamber with electrical components, electrical connection is also required to ensure that the electrical line is correct and the insulation is done.

Routine maintenance

1. Regular inspection: Check the brake chamber regularly, including whether the connecting pipes, fasteners, seals, etc. are intact, and whether the electrical connection is reliable.

2. Cleaning and maintenance: Regularly clean the surface of the brake chamber and the surrounding environment to prevent the accumulation of dust, oil and other debris affecting heat dissipation and performance. At the same time, the lubrication part is lubricated to maintain its flexibility.

3. Replace the wear parts: When the brake chamber or its components are found to be worn, aging and other phenomena, the wear parts should be replaced in time to avoid affecting the brake performance and safety.

Cleaning and maintenance

1. Professional cleaning: Regular professional cleaning of the brake chamber, remove internal oil, impurities and other pollutants, keep its internal clean and dry.

2. Anti-corrosion treatment: Anti-corrosion treatment of the metal components of the brake chamber to prevent them from being corroded and affecting the service life.

3. Lubrication maintenance: the lubrication parts of the brake chamber are regularly lubricated and maintained to maintain good lubrication performance and reduce wear and failure.