| | ||
| Product: | Refueling tanker | Item number: | WDQ5070GJY6CA |
| Curb weight (kg): | 3795 | Overall dimension(mm) | 5995×2060×2650 |
| Gross weigth(kg) | 7360 | Tank size | 5995×2060×2650 |
| Rated load capacity (kg) | 3370 | Transport medium | Diesel, gasoline |
| Tank volume(M3): | 5.05 | Engine: | WP2.3NQ130E61 |
| Num of people in cab | 3 | ||
| Carriage configuration: | |||
| Q235 carbon steel, thickness of 4.2mm, with overflow valve pump, inlet and outlet on the right, one European standard tank port, one bottom valve with voice prompt alarm device, one set of lower loading and oil and gas recovery (on the right side), fuel dispenser position reserved on the left , one tool box, two oil pipelines and two fire extinguishers.Optional parts: flow meter, filling machine and reel. | |||
| Features of Carriage Technics: | |||
Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. | |||
| Chassis configuration: | |||
| Weichai: chassis model: CA1070P40K61L2BE6A84, J6F (2010) single-row cab, wheelbase 3300mm, Weichai WP2.3NQ130E61,CA6TBX036M, 295H rear axle (speed ratio 4.875, track width 1525), 780 * 180 * 65 * 5, tire 7.00R16LT 14PR, multi-function steering wheel, 150L aluminum alloy oil tank, leaf spring 3/7+9, with domestic ABS, special chassis for dangerous goods. | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Refueling tanker | Item number: | WDQ5125GJY6C |
| Curb weight (kg): | 5285 | Overall dimension(mm) | 6950×2250×2800 |
| Gross weigth(kg) | 11950 | Tank size | 4800×1900×1320 |
| Rated load capacity (kg) | 6470 | Transport medium | Gasoline |
| Tank volume(M3): | 9.7 | Engine: | YCY30165-60,D30TCIF1 |
| Num of people in cab | 3 | ||
| Carriage configuration: | |||
| Q235 carbon steel plate, national standard thickness, single bin, with overflow valve pump, one European standard tank mouth, one submarine valve, with voice prompt alarm device, with a set of lower oil loading system, which is installed on the right side, and reserves the position of fuel dispenser and reel. Optional parts: flow meter, fuel dispenser and reel | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: the tank surface is sandblasted to achieve the effect of dust removal, dirt removal and rust removal, enhance the thickness and adhesion of the paint, and the paint baking process is to achieve pre-assembly+paint baking+final assembly, and the paint on the whole vehicle is free of dead corners and omissions. | |||
| Chassis configuration: | |||
| Yuchai: chassis model: EQ1125SJ8CDCWXP, 20 Dolika D72030/single row, YCY30165-60 engine, 3800 wheelbase, 121 power, Wanliyang 6TS55245/70R19.5 16PR vacuum tire, front axle 2.7 tons disc brake, rear axle 5.5 tons, 800-192 * 65*(6+3) frame, with explosion-proof tire emergency device, lane departure warning, front collision warning, with air conditioning electric door and window central locking. Yunnei: chassis model: EQ1125SJ8CDCWXP, 3800 wheelbase, D30TCIF1, Yunnei 170 hp engine, Fast 8-gear transmission, 255/70R22.5 16PR vacuum tire, front and rear axle 3.5/6.0T, double-layer straight beam, LCD digital instrument panel, original air conditioning central control electric glass, Multi-function steering wheel, constant speed cruise, new regulations, lane departure warning, anti-collision warning. | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | WDQ5181GYY6E |
| Curb weight (kg): | 8135 | Overall dimension(mm) | 8500×2550×3350 |
| Gross weigth(kg) | 18000 | Tank size | 5800×2200×1450 |
| Rated load capacity (kg) | 9670/9735 | Transport medium | Gasoline |
| Tank volume(M3): | 14.5 | Engine: | Cummins B6.2NS6B230 |
| Num of people in cab | 2, 3 | ||
| Carriage configuration: | |||
| Q235 carbon steel plate, national standard thickness, single bin, with overflow valve pump, one European standard tank mouth, one submarine valve, with voice prompt alarm device, with a set of lower oil loading system, which is installed on the right side, and reserves the position of fuel dispenser and reel. Optional parts: flow meter, fuel dispenser and reel | |||
| Features of Carriage Technics: | |||
Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. | |||
| Chassis configuration: | |||
| Cummins: chassis model: EQ1185L9CDFWXP, Dolika D9 chassis, row half 2315 cab, Cummins B6.2NS6B230, Fast 8SJ95 transmission, 295/80R22.5 18PR tires, front axle 4.5t disc brake, rear axle 10t (Dana Bridge), 250 double frames, with air-conditioned electric window, airbag seat, air suspension, power take-off, explosion-proof tire, with lane departure warning, front collision warning | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | WDQ5260GYY6D |
| Curb weight (kg): | 11805 | Overall dimension(mm) | 9800×2550×3500 |
| Gross weigth(kg) | 26000 | Tank size | 7000×2350×1620 |
| Rated load capacity (kg) | 14000/14065 | Transport medium | Gasoline |
| Tank volume(M3): | 21 | Engine: | DDi75E300-60 |
| Num of people in cab | 2, 3 | ||
| Carriage configuration: | |||
| Q235 carbon steel plate is used, according to the national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower loading oil and oil gas recovery (right), the left reserved fuel dispenser position, one tool box, two oil pipelines, two fire extinguishers, and the rest are made according to the standard configuration. Optional parts: flow meter, fuel dispenser and reel. | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: the tank surface is sandblasted to achieve the effect of dust removal, dirt removal and rust removal, enhance the thickness and adhesion of the paint, and the paint baking process is to achieve pre-assembly+paint baking+final assembly, and the paint on the whole vehicle is free of dead corners and omissions. | |||
| Chassis configuration: | |||
| Tianlong D310 row semi-standard top cab, 6-cylinder Longqing 300-horsepower engine, wheelbase 4600+1350mm, 295/80R22.5 18PR tires, Shaanxi-Gear 9-gear transmission, aluminum alloy 350L fuel tank, air suspension, airbag seat, air conditioning, electric glass, front disc rear drum, EBS electronic brake, FCWS/LDWS front collision/lane deviation warning, ECAS remote control electrically regulated air suspension, TPMS front axle single tire pressure monitoring. | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | Q5260GYY6SX |
| Curb weight (kg): | 11525 | Overall dimension(mm) | 9900×2550×3400 |
| Gross weigth(kg) | 26000 | Tank size | 7000×2180×1520 |
| Rated load capacity (kg) | 14345 | Transport medium | Diesel |
| Tank volume(M3): | 17.8 | Engine: | WP8.350E61 |
| Num of people in cab | 2 | ||
| Carriage configuration: | |||
| Made of Q235 carbon steel plate, according to the national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower loading oil and oil gas recovery (right side), reserved fuel dispenser position on the left side, one tool box, two oil pipelines, two fire extinguishers, and the rest are made according to the standard configuration. Optional parts: flow meter, fuel dispenser and reel | |||
| Chassis configuration: | |||
| Chassis model: SX1269MB4WQ1, Delong M3000 cab, WP8.350E61 engine, 10JSD140TB transmission, 5.5t front axle, MAN11T Single-stage 4.875 rear axle, 4575+1400mm wheel base, 12R22.5 18PR tires, extended half-height top cab, central control lock, cab hydraulic suspension,Aluminum case gearbox, air main seat, electric overturn, road bumper, electric automatic thermostat, electric window lifter, EBS, ESC, exhaust pipe Front, 165AH maintenance-free battery, spare wheel frame, LED headlamp, Tianxing Jianzhiya board, 4G terminal, dangerous goods identification plate, front axle disc brake,ECU speed limit, 2KG fire extinguisher, electromagnetic power master switch, 400L aluminum alloy oil tank, 5.5T front axle, tire burst protection device, hazardous intelligent safety Package, single tire pressure monitoring. | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | WDQ5260GYY6ZZ |
| Curb weight (kg): | 11805 | Overall dimension(mm) | 10200×2550×3450 |
| Gross weigth(kg) | 26000 | Tank size | 7300×2300×1600 |
| Rated load capacity (kg) | 14000/14065 | Transport medium | Gasoline |
| Tank volume(M3): | 21 | Engine: | MC07.31-60 |
| Num of people in cab | 2, 3 | ||
| Carriage configuration: | |||
| Q235 carbon steel plate, national standard thickness, with overflow valve pump, pump inlet and outlet on the right side, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower oil loading and oil and gas recovery (right side), reserved fuel dispenser position on the left side, one tool box, two oil pipelines and two fire extinguishers Optional parts: flow meter, fuel dispenser and reel | |||
| Features of Carriage Technics: | |||
Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. | |||
| Chassis configuration: | |||
| Benz white; Shandeka G5; Special vehicle; G5-M cab; MC07.31-60 engine; HW13709XSTC2 transmission+HW70 Flange type power take-off; VPD75D front axle (disc); MCY11BGS self-adjusting arm double rear axle (drum); Speed ratio 4.63; Double-layer frame (8+4/280); Front and rear air suspension (3/-/-); Bosch steering gear; Front exhaust system; EBS+ESC； High bumper (all metal); Aluminum alloy wheels (domestic); 295/80R22.5； 300L oil tank; LDWS+FCWS； Knob type PTO; China Heavy Truck Intelligent Communication (Version B); Electromagnetic power switch; Emergency device for steering wheel blowout; 165AH battery; | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | WDQ5261GYY6SX |
| Curb weight (kg): | 11865 | Overall dimension(mm) | 9980×2550×3500 |
| Gross weigth(kg) | 26000 | Tank size | 7000×2400×1660 |
| Rated load capacity (kg) | 14005 | Transport medium | Gasoline |
| Tank volume(M3): | 21 | Engine: | WP8.350E61 |
| Num of people in cab | 2 | ||
| Carriage configuration: | |||
| Q235 carbon steel plate is used, according to the national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower loading oil and oil gas recovery (right), the left reserved fuel dispenser position, one tool box, two oil pipelines, two fire extinguishers, and the rest are made according to the standard configuration. Optional parts: flow meter, fuel dispenser and reel. | |||
| Features of Carriage Technics: | |||
Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. | |||
| Chassis configuration: | |||
| Delong M3000 cab, WP8.350E61 engine, 10JSD140TB transmission, 5.5t front axle, MAN11T single-stage 4.875 rear axle, 4575+1400mm wheelbase, 12R22.5 18PR tires, extended half-height cab, central control lock, aluminum case transmission, air main seat, electric rollover, highway bumper, electric automatic thermostatic air conditioner, electric window lifter, EBS, ESC, front exhaust pipe, 165AH maintenance-free battery, spare wheel rack, LED headlights, Tianxing Jianzhiya board, 4G terminal, dangerous goods identification plate, front axle disc brake, ECU speed limit, 2KG fire extinguisher, electromagnetic power main switch, 400L aluminum alloy oil tank, 5.5T front axle, tire burst protection device, dangerous chemical intelligent safety bag, single tire pressure monitoring. | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | WDQ5262GYY6SX |
| Curb weight (kg): | 10285 | Overall dimension(mm) | 9950×2550×3500 |
| Gross weigth(kg) | 25500 | Tank size | 7200×2180×1520 |
| Rated load capacity (kg) | 15020, 15085 | Transport medium | Diesel |
| Tank volume(M3): | 19 | Engine: | YCS06245-60 |
| Num of people in cab | 2,3 | ||
| Carriage configuration: | |||
| Q235 carbon steel plate is used, according to the national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower loading oil and oil gas recovery (right), the left reserved fuel dispenser position, one tool box, two oil pipelines, two fire extinguishers, and the rest are made according to the standard configuration. | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: the tank surface is sandblasted to achieve the effect of dust removal, dirt removal and rust removal, enhance the thickness and adhesion of the paint, and the paint baking process is to achieve pre-assembly+paint baking+final assembly, and the paint on the whole vehicle is free of dead corners and omissions. | |||
| Chassis configuration: | |||
| Yuchai YCS06245-60, Shaanchi small eighth-gear 85T, Shaanqi Xuande X6 cab, 1800+4300mm wheelbase, 5t double front axle, 11.5t airbag rear axle, 280mm double layer, 295/80R22.5 tires, pearl white, with air conditioning, with ABS, lane departure and collision warning, tire pressure monitoring, ESB, ESC. | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | WDQ5262GYY6ZZ |
| Curb weight (kg): | 12060 | Overall dimension(mm) | 9820×2540×3435 |
| Gross weigth(kg) | 26000 | Tank size | 6800×2380×1580 |
| Rated load capacity (kg) | 13,810 | Transport medium | Gasoline |
| Tank volume(M3): | 20.7 | Engine: | MC07H.35-60 |
| Num of people in cab | 2 | ||
| Carriage configuration: | |||
| Q235 carbon steel plate, national standard thickness, with overflow valve pump, pump inlet and outlet right side, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower loading oil and oil gas recovery (right side), left reserved fuel dispenser position, one tool box, two oil pipelines, two fire extinguishers, optional parts: flow meter, fuel dispenser and reel | |||
| Features of Carriage Technics: | |||
| Flaw detection process All main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: panel welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process The surface of the tank body is sandblasted to achieve the effect of dust removal, dirt removal and rust removal, enhance the thickness and adhesion of the paint, and the paint baking process is to achieve pre-assembly+paint baking+final assembly. The paint on the whole vehicle is free of dead corners and omissions. | |||
| Chassis configuration: | |||
| Chassis model: ZZ1267N464GF1K, wheelbase 4575+1400mm, HOWO TX5, special vehicle, TX-W cab, main airbag * auxiliary simple seat, MC07H.35-60 engine, HW19710 transmission+HW70 flange power take-off, with hydraulic retarder, VPD75D front plate (shaft), 16 ton rear axle, Special chassis for dangerous goods. 12R22.5 18PR, 295/80R22.5 18PR, 300-litre fuel tank, reversing buzzer, tire pressure monitoring, emergency device for steering wheel blowout, front exhaust system, LDWS+FCWS (with radar) | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | WDQ5265GYY6SX |
| Curb weight (kg): | 11870 | Overall dimension(mm) | 9900×2550×3450 |
| Gross weigth(kg) | 26000 | Tank size | 7000×2300×1600 |
| Rated load capacity (kg) | 14,000 | Transport medium | Gasoline |
| Tank volume(M3): | 20 | Engine: | WP8.350E61 |
| Num of people in cab | 2 | ||
| Carriage configuration: | |||
| Made of Q235 carbon steel plate, according to the national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower loading oil and oil gas recovery (right side), reserved fuel dispenser position on the left side, one tool box, two oil pipelines, two fire extinguishers, and the rest are made according to the standard configuration. Optional parts: flow meter, fuel dispenser and reel | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: sand blasting on the tank surface to achieve dust removal, dirt removal and rust removal effect, enhance the paint thickness and adhesion, paint baking process, achieve pre-assembly+paint baking+final assembly, and the whole vehicle paint has no dead corner and no omission | |||
| Chassis configuration: | |||
| Delong M3000 cab, WP8.350E61 engine, 10JSD140TB transmission, 5.5t front axle, MAN11T single-stage 4.875 rear axle, 4575+1400mm wheelbase, 12R22.5 18PR tires, extended half-height cab, central control lock, cab hydraulic suspension, aluminum case transmission, air main seat, electric overturning, electric automatic thermostatic air conditioner, electric window lifter, EBS, ESC, front exhaust pipe, 165AH maintenance-free battery, spare wheel rack, LED headlight, Tianxing Jianzhiya board, 4G terminal, dangerous goods identification plate, front axle disc brake, ECU speed limit, 2KG fire extinguisher, 400L aluminum alloy oil tank, 5.5T front axle, tire burst protection device, single tire pressure monitoring. | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | WDQ5320GYY6SX |
| Curb weight (kg): | 13600 | Overall dimension(mm) | 11730×2550×3450 |
| Gross weigth(kg) | 32000 | Tank size | 8800×2400×1600 |
| Rated load capacity (kg) | 18,270 | Transport medium | Gasoline |
| Tank volume(M3): | 27.4 | Engine: | WP8.350E61 |
| Num of people in cab | 2 | ||
| Carriage configuration: | |||
| The tank body is made of Q235 carbon steel plate, national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower oil and oil gas recovery (right side), reserved fuel dispenser position on the left side, one tool box, two oil delivery pipes, two 8kg fire extinguishers, optional parts: flow meter, fuel dispenser and reel | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: sand blasting on the tank surface to achieve dust removal, dirt removal and rust removal effect, enhance the paint thickness and adhesion, paint baking process, achieve pre-assembly+paint baking+final assembly, and the whole vehicle paint has no dead corner and no omission | |||
| Chassis configuration: | |||
| Drive type: 8 * 4, Shaanxi Automobile M3000, chassis model: SX1329MB6WQ1, engine model: WP8.350E61, Weichai 350 horsepower, wheelbase: 1800+4575+1400mm, 10JSD140TB transmission, tires: 12R22.5 18PR, rear axle MAN11T single-stage 4.875400L aluminum alloy oil tank, M3000 standard cab, pearl white, new chassis. | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Fuel tanker | Item number: | WDQ5321GYY6ZZ |
| Curb weight (kg): | 14740, 14370 | Overall dimension(mm) | 11850/10900×2540×3520 |
| Gross weigth(kg) | 32000 | Tank size | 8800×2300×1600/7800×2450×1650 |
| Rated load capacity (kg) | 17130, 17500 | Transport medium | Gasoline |
| Tank volume(M3): | 25.2 | Engine: | WP9H350E62,MC07H.35-60 |
| Num of people in cab | 2 | ||
| Carriage configuration: | |||
| The tank body is made of Q235 carbon steel plate, national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower oil and oil gas recovery (right side), reserved fuel dispenser position on the left side, one tool box, two oil delivery pipes, two 8kg fire extinguishers, optional parts: flow meter, fuel dispenser and reel | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: sand blasting on the tank surface to achieve dust removal, dirt removal and rust removal effect, enhance the paint thickness and adhesion, paint baking process, achieve pre-assembly+paint baking+final assembly, and the whole vehicle paint has no dead corner and no omission | |||
| Chassis configuration: | |||
| Weichai: HOWO TX7 special vehicle, TX-K cab, multi-function steering wheel, WP9H350E62 engine, HW25712XSTL transmission+HW70 flange power take-off, 7.5T small drop front axle (disc), MATI6ZG self-adjusting arm double rear axle (drum), speed ratio 5.32, double frame (8+5/300); wheelbase 1950+3800+1400mm/1950+4600+1400mm, front and rear air suspension (4/4/-/-): 8118 steering gear, speed limit of 79km/h, front exhaust system, EBS+ESC, 12R22.5400L fuel tank; LDWS+FCWS (with radar); China Heavy Truck Intelligent Communication (Version B); Four-direction camera; Electromagnetic power switch; Terminal emission monitoring device; Emergency device for steering wheel blowout | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Aluminum alloy fuel tanker | Item number: | WDQ5261GYY6ZZA |
| Curb weight (kg): | 9805 | Overall dimension(mm) | 9950×2540 ×3500 |
| Gross weigth(kg) | 26000 | Tank size | 7200×2480×1720 |
| Rated load capacity (kg) | 16000, 16065 | Transport medium | Gasoline |
| Tank volume(M3): | 23.5 | Engine: | MC07H.35-60 |
| Num of people in cab | 2,3 | ||
| Carriage configuration: | |||
| It is made of aluminum alloy 5182 plate, according to the thickness of the national standard, single bin, with overflow valve pump, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower oil and oil gas recovery (right side), and the left side is reserved for the position of the fuel dispenser. The accessories are made of aluminum alloy, one tool box, guardrail, rear ladder, two oil pipes, two fire extinguishers, and the rest are made according to the standard configuration. | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: the tank surface is sandblasted to achieve the effect of dust removal, dirt removal and rust removal, enhance the thickness and adhesion of the paint, and the paint baking process is to achieve pre-assembly+paint baking+final assembly, and the paint on the whole vehicle is free of dead corners and omissions. | |||
| Chassis configuration: | |||
| Chassis model: ZZ1267N464GF1K, engine model MC07H.35-60, 4575+1400 (mm) wheelbase chassis, 295/80R22.5 vacuum tire, front exhaust pipe, front wheel disc brake; The driving recorder with satellite positioning function is installed, the rear axle is equipped with air suspension, and the steering wheel is equipped with emergency protective device for tire burst; | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Aluminum alloy fuel tanker | Item number: | WDQ5263GYY6SX |
| Curb weight (kg): | 8700 | Overall dimension(mm) | 9950×2550×3500 |
| Gross weigth(kg) | 25500 | Tank size | 7200×2350×1620 |
| Rated load capacity (kg) | 16605. 16670 | Transport medium | Diesel, gasoline |
| Tank volume(M3): | 21 | Engine: | YCS06245-60 |
| Num of people in cab | 2,3 | ||
| Carriage configuration: | |||
| The tank body is made of aluminum alloy 5182 plate, national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower oil loading and oil and gas recovery (right side), reserved fuel dispenser position on the left side, one tool box, two oil pipelines, two 8kg fire extinguishers, all accessories are made of aluminum alloy | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: the tank surface is sandblasted to achieve the effect of dust removal, dirt removal and rust removal, enhance the thickness and adhesion of the paint, and the paint baking process is to achieve pre-assembly+paint baking+final assembly, and the paint on the whole vehicle is free of dead corners and omissions. | |||
| Chassis configuration: | |||
| Chassis model: SX1260GP6439, Shaanqi Wing 6 half-height top/2220 standard version (comfortable airbag seat, electric window, air conditioner, central lock, multi-function steering wheel, Tianxing Jianzhiya version BD vehicle terminal, four-point full-floating suspension), Yuchai YCS06245-60 engine, Shaanchi small eighth gear 8JS85TE with synchronizer with power take-off, wheelbase 1800+430mm, 295/80R22.5 18PR, 5-ton double front axle, 11.5 ton composite airbag Handman rear axle, 280 double girder, front disc axle, EBS, ESC, safety belt buckle alarm; New regulations: explosion-proof tire, friction plate alarm, tire pressure monitoring, lane departure collision alarm | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Aluminum alloy fuel tanker | Item number: | WDQ5320GYY6ZZA |
| Curb weight (kg): | 11270, 11205 | Overall dimension(mm) | 11860×2550×3700 |
| Gross weigth(kg) | 32000 | Tank size | 8800×2250×1560 |
| Rated load capacity (kg) | 20,600 | Transport medium | Diesel, gasoline |
| Tank volume(M3): | 24.3 | Engine: | MC07H.35-60 |
| Num of people in cab | 2,3 | ||
| Carriage configuration: | |||
| The tank body is made of aluminum alloy 5182 plate, national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower oil and oil and gas recovery (right side), left reserved fuel dispenser position, one tool box, two oil pipelines, two 8kg fire extinguishers, all accessories are made of aluminum alloy, stainless steel barrel | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: the tank surface is sandblasted to achieve the effect of dust removal, dirt removal and rust removal, enhance the thickness and adhesion of the paint, and the paint baking process is to achieve pre-assembly+paint baking+final assembly, and the paint on the whole vehicle is free of dead corners and omissions. | |||
| Chassis configuration: | |||
| Shandeka G5; Special vehicle; G5-F cab (flat top widened sleeper cab); MC07H.35-60 engine; Wheelbase 1800+4575+1400mm, HW13709XSTC2 gearbox+HW70 flange power take-off; Tyre: 295/80R22.5 18PR (12R22.5 18PR), VPD75D front axle (disc); MCY11BGS self-adjusting arm double rear axle (drum); Speed ratio 4.63; Double-layer frame (8+4/280); Front and rear air suspension (3/3/-/-); Bosch steering gear; Front exhaust system; EBS+ESC； High bumper (all metal);; 400L oil tank; LDWS+FCWS； Emergency device for steering wheel blowout; Optional reversing buzzer; Optional tire pressure monitoring system; Optional dangerous goods sign lamp; | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||
| | ||
| Product: | Aluminum alloy fuel tanker | Item number: | WDQ5322GYY6ZZA |
| Curb weight (kg): | 11470 | Overall dimension(mm) | 11850×2530×3500 |
| Gross weigth(kg) | 32000 | Tank size | 8800×2250×1560 |
| Rated load capacity (kg) | 20355, 20400 | Transport medium | Diesel, gasoline |
| Tank volume(M3): | 24.3 | Engine: | MC07H.35-60 |
| Num of people in cab | 2,3 | ||
| Carriage configuration: | |||
| The tank body is made of aluminum alloy 5182 plate, national standard thickness, single bin, with overflow valve pump, pump in and pump out, two European standard tank ports, one submarine valve, with voice prompt alarm device, one set of lower oil and oil and gas recovery (right side), left reserved fuel dispenser position, one tool box, two oil pipelines, two 8kg fire extinguishers, all accessories are made of aluminum alloy, stainless steel barrel | |||
| Features of Carriage Technics: | |||
| Flaw detection process: all main welds of the tank body shall be operated in strict accordance with the flaw detection process (single-sided welding and double-sided forming: butt welding - copper groove, circumferential seam welding - ceramic backing process), and flaw detection (X-ray detection) shall be carried out according to the flaw detection ratio specified in GB18564.1-2019 standard. Sand blasting process: sand blasting on the tank surface to achieve dust removal, dirt removal and rust removal effect, enhance the paint thickness and adhesion, paint baking process, achieve pre-assembly+paint baking+final assembly, and the whole vehicle paint has no dead corner and no omission | |||
| Chassis configuration: | |||
| HOWO TX5; TX-V cab chassis model: ZZ1327N466GF1K, MC07H.35-60 engine; HW13709XSTC2 gearbox+HW70 flange power take-off; Wheelbase 1800+4575+1400 special vehicle; Main airbag+auxiliary simple seat; VPD75D front axle (disc); MCY11BGS self-adjusting arm double rear axle (drum); Speed ratio 4.63; Double-layer frame (8+4/280); Front and rear air suspension (3/3/-/-); 8198 steering gear; Front exhaust system; EBS+ESC； Middle bumper (non-metallic); Ordinary wheels; 12R22.5； 300L oil tank; LDWS+FCWS (with radar); Knob type PTO; CNHTC Intelligent Communication (Version D); Emergency device for steering wheel blowout; Optional tire pressure monitoring system; | |||
| Note: The above configurations are for reference only, and the final product is subject to the confirmation of the actual order. | |||