Share to:

Ball Bearing Turntables and Slewing Rings

  • 1st China company to R&D and export turntables
  • Implementing IATF16949-2016
  • Implementing ISO9001-2015
  • 22 years production experience(since 1999)
  • Working accuracy: exceeding European standards
  • Product technical standard: JT/T 651-2006 & LY/T 1292-1998
  • 24 months warranty
  • Quality testing by an independent laboratory 
  • Sales volume (units): 20,000+ per year
  • 100% customer satisfaction
Availability:

Applications

Position of turntable


Ball bearing turntables and slewing rings are parts for fitting onto trailers and agricultural vehicles to connect the vehicle frame to the trailer chassis so it can swivel.

As the 1st China company to R&D and export turntables, WONDEE is proud to offer ball bearing turntables covering the complete spectrum of trailer technology, including both single and double race turntables to suit all applications ranging from on to off-road.

The range of applications for ball bearing turntables and slewing rings depends on the maximum axle load. WONDEE ball bearing turntables and slewing rings cover an axle load range from 7.5 to 250 kN.


For more about WONDEE trailer turntable project, please enter:


wondee turntable porject

Features

Trailer turntable (5)


Features Advantages
Material - nodular cast iron QT500-7 High tensile material to asure loading capacity
Material tensile stress more than 500Mpa Longer using life
Radial clearance ≦ 0.65mm Exceed European Standard 0.70mm
Axial clearance ≦ 0.90mm Exceed European Standard 1.00mm
Overall height   within ±0.5mm Exceed European Standard ±3.0mm
Diameters within ±0.5mm Exceed European Standard ±3.0mm
Parallelism of top and bottom ring Easily installation & smoothly rotation
Coupling gap of top and bottom ring No noise & longer using life
Smoothly rotation Longer using life
Ball rail roughness Ra 0.8 Smoothly rotation
Surface roughness Ra 3.2 Good finishing
Flatness ≦ 0.15mm Good finishing
2-Course dust-proof design Better dust prevention
Good consistency All in same dimensions & features
Loading capacity No less than European standards
Ball bearings Using well-known brand bearings with large load capacity, high speed, good rigidity, wear-resistant, heat-resistant and shock-resistant, safety to use;
Grease High efficiency special grease is used to ensure good lubrication effect in various working environments and prolong the service life of the bearing.
Sales volume (units) 20,000+ per year


Comprehensive info of turntables:

Factory facts Land area (square meters ) 25,000+
Sets of annual output 20,000+
Number of equipments (sets) 200+
Number of employees 100+
Number of engineers 6
Product range Series UA type, UB type, U type, ZA type, ZB type, UC type
Axial capacity 2Ton,   3Ton, 5Ton, 6Ton, 10Ton, 12Ton, 13Ton, 14Ton, 16Ton, 18Ton, 20Ton, 22Ton
Size/Diameter 1200mm, 1100mm, 1050mm, 1000mm, 950mm, 900mm, 880mm, 850mm, 800mm, 750mm, 600mm,   500mm, 400mm and 300mm
Height 45mm,   52mm, 55mm, 58mm, 60mm, 65mm, 80mm, 90mm, 92mm and 94mm
Bearing ball race Single-row ball race, double-row ball race
Amounting hole Drilled or Undrilled
Application Heavy duty full trailer, farm trailers, light truck trailers, drawbar trailers, slewing rings for special vehicles and industry
Interchangeable BPW turntables, JOST turntables, Rothe Erde   turntables
Color Shiny black, dark black, grey, blue, red are optional
Quality control Automotive quality   management systems IATF16949-2016 implementation
Product technical standard JT/T 651-2006 & LY/T 1292-1998
Working accuracy Exceeding European Standards
Quality testing by An independent laboratory in China
Customer satisfaction 100%
Customer & service Quality management systems ISO9001-2015 implementation
Clients 40+
Overseas market 30+ countries
Related certificate availability IATF16949; COC; PVOC; CIQ; SONCAP;   BV; C/O; FORM E
Warranty 24 months since shipping date
Payment term TT, LC, DP
Lead time About 10~15 working days
MOQ 10 pcs


Ball bearing turntables and slewing rings features:


Ball bearing turntables and slewing rings are parts for fitting onto trailers and agricultural vehicles to connect the vehicle frame to the trailer chassis so it can swivel.

WONDEE ball bearing turntables and slewing rings cover the complete spectrum of trailer technology and have a solution to suit all applications.

The range of applications for ball bearing turntables and slewing rings depends on the maximum axle load. WONDEE ball bearing turntables and slewing rings cover an axle load range from 7.5 to 250 kN.

The specified axle loads for series U, UA, UB, ZA, ZB and UC relate to use where the slewing ring is mounted on the front axle of a trailer with three axles and fifth wheel steering, travelling at speeds of up to 100 kph (65 mph). On dual-axle trailers, the specified axle loads can be exceeded by 10% or 20% at speeds below 30 kph (18 mph).

Ball bearing turntables are available as standard drilled and undrilled, slewing rings are available undrilled. Special drill templates are available upon request.


The materials and production processes are carefully selected to deliver the highest quality. The turntable sections are made of casting formed, CNC, calibrated, high-strength material - nodular cast iron QT500-7. As a result, the turntables can be used even under extreme conditions.


WONDEE turntables guarantee a minimum of down time due to their long service life.

The ball race is secured under load by the axial ball race.

The space inside the turntable is provided with long-lasting protection against dust and dirt by a labyrinth seal.

The sum of all these advantages ensures reliability, freedom of movement and the highest possible service life.

Parameters

UA series ball bearing casting turntable for heavy duty full trailer and semi trailer:


UA single ball bearing turntable


Item   No. ØA ØB C ØD Tonnage Weight Section  Type Replacement
(mm) (mm) (mm) (mm) (ton) (kg)
UA type turntables with single-row ball race
TS1300-90UA01 1300 1308 90 1146 14 120 UA KLK HE 1300-22
TS1200-90UA01 1200 1208 90 1059 13 110 UA KLK SO 1200-24
TS1200-90UA05 1200 1215 90 1044 13 110 UA KLK HE 1200-22
TS1102-90UA01 1102 1110 90 945 12 99 UA KLK HE 1100-22
TS1100-90UA01 1100 1115 90 945 12 99 UA KLK HE 1100-22
TS1100-90UA02 1100 1108 90 945 12 97 UA KLK SO 1100-24
TS1000-92UA01 1000 1010 92 859 10 80 UA KLK SO 1000-24
TS1000-90UA01 1000 1008 90 859 10 80 UA KLK HE 1000-22
TS1000-90UA02 1000 1015 90 860 10 80 UA KLK HE18-1000
TS1090-80UA01 1090 1105 80 972 6.5 85 UA KLK HE 6
TS1000-80UA01 1000 1015 80 882 6 80 UA KLK HE 6-1000
TS880-80UA01 880 895 80 762 5 70 UA KLK HE 5
TS685-82UA01 685 700 80 567 3 50 UA KLK HE 4
TS685-80UA01 685 700 80 563 3 50 UA KLK HE 4


UA double ball bearing turntable

Item   No. ØA ØB C ØD Tonnage Weight Section  Type Replacement
(mm) (mm) (mm) (mm) (ton) (kg)
UA type turntables with double-row ball race
TD1200-94UA01 1195 1208 94 1040 20 118 UA DK 90/30/1212
TD1100-90UA01 1100 1108 90 945 12 100 UA DK 90/20/1108
TD1096-92UA01 1108 1096 92 940 12 100 UA DK 90/20/1108
TD1198-92UA04 1215 1198 92 1042 18 115 UA DK 90/30/1212
TD1100-92UA01 1108 1100 92 940 12 100 UA DK 90/20/1108
TD1000-90UA01 985 1000 90 834 14 80 UA DK 90/14/1008

UB turntable

Item   No. ØA ØB C ØD Tonnage Weight Section  Type Replacement
(mm) (mm) (mm) (mm) (ton) (kg)
UB type turntables
TS1000-90UB01 1000 1000 90 846 7 82 UB


ZA turntable

Item   No. ØA ØB C ØD Tonnage Weight Section  Type Replacement
(mm) (mm) (mm) (mm) (ton) (kg)
ZA type turntables
TS1050-56ZA01 1050 945 56 832 5 60 ZA KDL 900-6 W
TS750-56ZA01 750 656 56 532 3 47 ZA KDL 900-3 W
TS520-56ZA01 520 426 56 302 2 30 ZA KDL 900-1 W

ZB ball bearing turntable

Item   No. ØA ØB C ØD Tonnage Weight Section  Type Replacement
(mm) (mm) (mm) (mm) (ton) (kg)
ZB type turntables
TS1050-52ZB01 1050 987 52 865 4.5 62 ZB KLK 1050N
TS950-58ZB01 950 887 58 749 4.5 50 ZB KLK 950N
TS850-52ZB01 850 787 52 665 3.5 48 ZB KLK 850N
TS750-52ZB01 750 684 52 554 3 40 ZB KLK 750N
TS750-45ZB01 750 684 45 554 3 40 ZB KLK 750L
TS650-52ZB01 650 587 52 465 2.5 35 ZB KLK 650N
TS500-52ZB01 500 437 52 300 2 32 ZB KLK 500N
TS400-52ZB01 400 342 52 230 0.8 28 ZB KLK 400N


UC ball bearing turntable

Item   No. ØA ØB C ØD Tonnage Weight Section  Type Replacement
(mm) (mm) (mm) (mm) (ton) (kg)
UC type turntables
TD1200-99UC01 1200 1200 99 1086 20 130 UC
TD1050-97UC01 1050 1046 97 870 16 116 UC


Turntable drilling pattern

Productions

WONDEE turntable factory and workshops:

Turntable factory and workshop

WONDEE turntable quality control :

Turntable quality checking

The production process of trailer casting turntables:

Trailer turntable (9)

1. Mould Making---2. Sandbox Making---3. Steel Blank Casting---4. Machining---5. Hole Drilling---6. Hole Threading---7. Assembling---8. Grease Filling---9. QC---10. Painting---11. Packing---12. Warehousing


The more about the casting turntable production process, Please kindly visit YOUTUBE link:

How to make turntable


Packing

WONDEE turntable packing and shipment:

Turntable packing and shipping


In addition to supplying different types of trailer turntables, WONDEE also supply different semi trailer components as below:


                                         

Headquarters

Xinhe Industrial Park, Xiamen, Fujian, China 361006

RESOURCES

COMPANY

Copyrignt @ 2021 XIAMEN WONDEE AUTOPARTS CO., LTD. All Rights Reserved | Friendly Links: www.wondee.com | www.wondeetrailerparts.com